Dosatron Seal Kit for Clever Injector
The seal kit required for a Clever Injector Dosatron will depend upon the serial number shown on the side of the unit (See Image Below). The serial number can be identified by reference to the side of unit as per the image below.
Seal kits required are as follows:-
Seal Kit Required
Dosatron Suction Barb & Check Valve PJDI118VVF
Suction Barb & Check Valve for 16mm pickup pipes
This spare part is used in the Dosatron proportional dispensers: D3RE25IE
The black painted components are included in this kit.
Suitable for use with D3 models, can be adjusted to regulate pressures to between 1 and 4 bar from a maximum inlet pressure of 16 bar but supplied pre-set at 3 bar. The installation of a pressure regulator in the water line before the Dosatron is recommended, particularly where pressure spikes can exceed the operating capacity of the Dosatron.
1" to 3/4" Male Reducing Nipple with 3/4" BSP Female Clunk Click Hose Fittings
This pump SPE1200SS pn:7237002 is perfect for connecting to a domestic supply (outside tap) to boost the flow of the water to your Clever Injector. This will increase the output when you are doing larger jobs.
The pump may need replacement fittings one day so here are...
Supplied complete with a 25 litre barrel, our compact portable trolley is suitable for use with D25, D3, D45 and D8 models and can be used to transport the unit to where you need it. The trolley body is made from powder coated mild steel.
FOR USE WITH DOSATRON D07, D25, D3, D45 & D8 MODELS
COMPLETE WITH 25 LI...
WFP Soft Wash Replacement Nozzles
The nozzles in the DA Applicator can be changed to suit the job you are working on. If you already have the DA Applicator you can purchase additional nozzles which can easily be fitted using a 14mm spanner or socket.
Included in the kit
The purple nozzle is a number 6.5. Full plastic cone and the orifice s...