Soft Washing Clever Injector Dosatron D25IL25VVFBP

Clever Injector will mix your Sodium Hypochlorite & Clever Wash surfactant together into the water supply to give you your soft wash mix. No working out how to mix your recipe, just set it going and let it do all the mixing for you. No leftover soft wash to deal with. No tanks of water or Sodium Hypochlorite to transport around with you.

All you need is your 20L drum of Sodium Hypochlorite and 5L of Clever Wash. Start by connecting your pump to the water supply to boost the water flow. Then connect your Clever Injector to the hose from your pump. Know all that's left to do is adjust the Clever Injector to the required Soft Wash recipe & start Soft Washing. It’s that simple!

5% to 25% dose rate

Sodium Hypochlorite drum 14% -15% concentrate

Softwash recipe 4% Set the Clever Injector setting to 25%

Used for rough tiled roofs and concrete, block driveways.

Softwash recipe 3% Set the Clever Injector setting to 20%

glazed tile roofs, block paving, render, brick & pool decks

Softwash recipe 2% (2.1%) Set the Clever Injector setting to 14%

heavily stained UPVC, industrial units,fencing panels, decks, tarmac, render, painted surfaces.

Softwash recipe 1% ( Set the Clever Injector setting to 7%

painted surfaces, delicate surfaces, fence panels, gutters & soffits, all other lightly stained surfaces.

Dose Rate: 5% -25%

Lowest flow rate 1.6 LPM  highest 33 LPM

Dose Rate: 5% -25%

Operating Pressure: 0.5 - 4 bar (7 - 58 psi)

Pipe connection size: ¾" BSP male
Maximum Water Temperature: 40°C 

Soft Wash Pro 50

To use the Clever Injector Dosatron with Soft Wash Pro 50 you must pre-diluted the Soft Wash Pro 50 first

1. Dilute 1L of  Soft Wash Pro 50 with 4L of water or 5L  Soft Wash Pro 50  with 20L water in to a 25L drum that you use with your Clever Injector Dosatron

• For Roofs and Render 2% recipe 25:1 set the Clever Injector Dosatron to 4:1 

• For Maintenance Clean 1% recipe 50:1 set the Clever Injector Dosatron to 9:1